Our 5 Stage process
Degrease and Cleaning
Multi surface industrial cleaner
Controlled Rinse
A Controlled fresh water rinse.
Surface Treatment
Iron Phosphate applied.
Controlled Rinse
A controlled fresh water rinse
Sealer/Rinse
Parts are treated with a sealer which extends the salt spray exposure.
Powder coatings are based on polymer resin systems, combined with curatives, pigments, leveling agents, flow modifiers, and other additives. These ingredients are melt mixed, cooled, and ground into a uniform powder similar to baking flour. A process called electrostatic spray deposition (ESD) is typically used to achieve the application of the powder coating to a metal substrate. This application method uses a spray gun, which applies an electrostatic charge to the powder particles, which are then attracted to the grounded part.
After application of the powder coating, the parts enter a curing oven where, with the addition of heat, the coating chemically reacts to produce long molecular chains, resulting in high cross-link density. These molecular chains are very resistant to breakdown. This type of application is the most common method of applying powders. Powder coatings can also be applied to non-metallic substrates such as plastics and medium density fiberboard (MDF).
